BS- model for powder chemicals
The BS-model is a complete systems to dilute powder chemicals with water in batch mode and if you have a standard dry feeder.
The system has an adjustable variable concentrations ratio of 1:5.
The model BS is built from a skid principle, where all components are connected and tested beforehand. This creates an efficient and easy installation, both electrical and hydraulic.
Easy maintenance and operation procedures make the model BS an ideal system for preparing carbon and lime suspensions, soda ash or even polyelectrolyte solutions that require batch preparation process.
I want to receive a product sheet of BS-model for powder chemicals
The main structure is built in HDPE with a cylindrical geometry, and can also optionally be built in a double deck design.
The level of available solution is controlled by an ultrasonic level probe hat which indicates the level by the measurement of the distance to the liquid, at its low level it initiates the reset process by opening the solenoid valve and at the high level it stops the dilution water entering.
The batch preparation volume can thus be controlled by the cycle start height adjustment. Whenever water enters, the powder dispenser will run simultaneously to return the solution to the concentration set by the operator. Optionally is possible include heater resistance in extractor tube, level sensor in hopper and bridge breaker. Standard models cover most part of process needs but our engineering department can study with costumers different options to improve present configurations to any situation.
Do you want to know more about the BS-model for powder chemicals dilution?